24/7 Emergency ServiceยทMon–Sat 7:00 AM – 7:00 PMServing Gardena & the South Bay · (424) 435-0441
  1. Home
  2. Pilot Light or Ignition Failure

Pilot Light or Ignition Failure

If your boiler won’t light or the pilot won’t stay lit, it can’t make heat or hot water. Here’s what usually causes it.

A pilot or ignition that won’t stay lit is often a faulty thermocouple or flame sensor, a draught, a gas supply issue, or a dirty burner. Repeated ignition failure needs a technician — don’t keep forcing it.

Smell gas? Leave the property right away, don’t switch anything on or off, and call your gas utility’s emergency line or 911 from outside. Don’t try to diagnose a gas smell yourself.

Common causes

SymptomLikely causeWhat it usually needs
Pilot lights then goes outFaulty thermocouple / flame sensorReplace component
No ignition at allGas supply or igniter faultProfessional diagnosis
Weak or yellow flameDirty burner or airflow issueClean / service
Repeated lockoutsIgnition or safety control faultProfessional repair

Safe things you can check first

  • Check other gas appliances are working (rules out a supply issue)
  • Confirm the gas valve to the boiler is open
  • Follow your boiler’s reset instructions once — but don’t keep retrying
  • Stop and call a pro if it won’t hold
Leave the rest to a pro. Don’t open the boiler casing or touch gas, pressurized or internal components. Those repairs need a qualified technician.

How we fix it

When you call, we send a licensed technician who diagnoses the actual cause on site rather than guessing from the symptom. You get a clear quote before any work starts, and with your go-ahead we carry out the repair and test the system before we leave. Most faults like this are repaired in a single visit; if a part needs ordering or replacement is the smarter call, we’ll tell you honestly.

When to call for repair

If the pilot won’t stay lit after one reset, or there’s no ignition, it needs professional repair. Call (424) 435-0441 for a diagnosis and a quote.

Common questions

Frequently asked questions

Why won’t my boiler pilot light stay on?

The most common cause is a faulty thermocouple or flame sensor that shuts the gas off because it thinks the flame is out. It usually needs replacing by a technician.

Should I keep relighting the pilot?

No. Try the manufacturer’s reset once. If it won’t hold, stop and call a professional rather than repeatedly introducing gas.

Can I fix this myself?

You can safely check simple things — the thermostat, power, and the pressure gauge — but anything involving gas, pressurized parts or the inside of the boiler should be left to a licensed technician. If you smell gas, leave and call your gas utility or 911 first.

Is this a boiler emergency?

If you have no heat in cold weather, no hot water across an apartment building, or water you can’t stop leaking, treat it as urgent — we offer 24/7 emergency service. Call (424) 435-0441.

How much will the repair cost?

It depends on the exact fault, the part involved, the age and type of boiler and access. We diagnose first and give you a clear quote before any work — no guessed prices over the phone.

No heat or no hot water? Let’s get it sorted.

Call now for same-day and 24/7 emergency boiler repair across Gardena and the South Bay. Licensed & insured.

Call (424) 435-0441
Or request a quote online and we’ll get back to you.
Call (424) 435-0441